How To Get Tree Sap Off A Car Window In 5 Minutes or Less

Tree sap can be a pain, particularly when removing it from a car window. You might want to read this tutorial to learn how to remove it easily. And to help you get rid of it, we’ll even recommend one of our favorite products.

Tree sap, even when dried, can be tricky to handle. Not to worry, by the time you’re done reading this article, you’ll be a pro at doing it.

Tree sap on car windows can scratch or damage windows. Plus, it can reduce visibility when there’s a lot of it. Now, let’s go over how you can remove it.

YOUR NEW GO-TO STICKY RESIDUE REMOVER

REMOVING TREE SAP, BUGS, BIRD POOP, AND OTHER STICKY MESSES HAS NEVER BEEN EASIER.

LEARN MORE

★★★★★

See what pro detailers are raving about

Carefully formulated to ATTACK the stickiest substances, Sap Attack gets rid of stubborn tree sap, tough tar, old bumper stickers, bugs, gum and asphalt. Works quickly to break down the contaminants and allow for easy removal.

What are the conventional ways to remove tree sap from a car window?

There are some common ways to remove tree sap from a car window. Let’s take a look at what these are:

The Best and Fastest Way To Remove Tree Sap From a Car Window

If you are looking for the real MVP for removing sap, then say hello to Sap Attack. With this product, you can remove dried sap from your windshield in no time. If you want to learn how to use it effectively, follow the instructions below.

Here’s what you need to do:

Safety note: Before using, wear nitrile gloves to protect your skin. Also, wear safety goggles. Since it’s solvent-based, it can harm your eyes and skin and is harmful to ingest.

Shake the bottle very well.
Spray Sap Attack gently on a microfiber towel and wipe it on the affected surface.
Repeat multiple applications if the sap is a bit stubborn.
Clean the surface with either regular soap or water. You can use a waterless wash as well.
Apply one final coating once the sap is completely removed. It will help make future tree sap contamination difficult.

Of course, we’d be remiss if we didn’t say it’s safe on paint, rims, and chrome. It would help if you didn’t use this on raw aluminum or bare metal. It should also not be used on plastic either.

Sap Attack is a great product, especially if you’re parking your car in front of many trees. You may have quite a few in your driveway that leak pretty badly.

So make sure you have it on hand. Because not only you’ll remove tree sap that’s already dried, but it will also prevent further contamination.

Using Ice

One way of removing tree sap that has yet to harden is using ice. The ice can quickly cool the sap compared to the windshield itself. Once it’s solid, you can remove it.

Get a few large ice cubes and place them in water. This will help soften the cubes. Then, place one of them over the sapped area for a few minutes.

Since the ice cubes are cold, you’ll want to wear work gloves as you apply this. Then, using your other hand, you’ll want to remove it with a plastic ice scraper or a putty knife (preferably a plastic one).

Rubbing Alcohol

Rubbing alcohol has been tried and true for sticky things. So it’s no secret that it can work for removing tree sap from a window. For this procedure, you’re going to need to use gloves.

Apply the rubbing alcohol to a microfiber cloth. Please do not use a towel or sponge because it might damage it. Next, place the fabric over the area and keep it there for a minute or so.

This should soften the sap. Once it does, gently rub the microfiber cloth in a circular motion. Do this until there is no more sap.

You can repeat the process and adjust the pressure if needed. You can follow it up with a glass cleaner afterward.

White Vinegar

Lastly, you could use white vinegar. To do this, you can fill it in a spray bottle. Next, spray a lot of it on the sap and let it sit for up to five minutes.

Then, you’ll want to wipe it in a circular motion using a microfiber cloth. Wash it off with hot, soapy water and make sure it’s rinsed well. Then dry it with another microfiber cloth and add glass cleaner to complete it.

These are all good solutions. However, some of them may require tools where you need to scrape off the tree sap. These tools can lead to your windshield getting scratched.

Not to mention, these are solutions for sap that has yet to dry. Believe us when we say removing it will be an even bigger task—especially with the solutions we’ve listed above.

You don’t want that. So it would be a good idea to choose a product that would be safer. We’ve got something for you, and you’ll want to check it out yourself. So here it is.

What else should be in your detailing arsenal?

We have plenty of Torque Detail products and would like to recommend them. But if there is one other product we want you to try, it’s our Decon Wash Pack. This includes our famous Decon Soap and a microfiber washing mitt.

It’s always a good idea to decon your vehicle so it’s free from water spots, chemical spots, and anything else that may damage the exterior of your car. Once you apply this, you’ll prevent future decontamination. Try this out, and you will be amazed by the results (especially when it lasts for a long time).