Mirror Shine™ was developed for ease of use, however taking proper steps when applying the product will help it last much longer.

If the sealant washes off or doesn't last as long as expected, this is usually because proper steps were not taken prior to application.

How To Apply:

1). Decontaminate Your Car's Surface

Remove the layer of dirt and contaminants from your car's surface. Sometimes this isn't visible to the naked eye. 

Mirror Shine™ is most effective when it bonds to the car's "clear coat". It's unable to do this if there is dirt and grime sitting atop the clear coat.

Use a polish or decontaminate "Decon" wash to clean your car's surface. To remove deep contaminants, we recommend "claying" your car as well. 

We use a Clay Lubricant and a Clay Block. The Clay Block is easier and faster than a traditional Clay Bar and can be used up to 100 times.

2). Shake Bottle Thoroughly Before Using

3). Make Sure Surface Is Cool and Dry

4). Spray a Small Amount of Mirror Shine™ onto your surface. Less Is More.

5). Use a Clean Microfiber Towel to Work Into Surface.

6). Use a 2nd Clean Microfiber Towel to Buff Into Surface Until Desired Polish Is Reached.

7). Apply To One Section at a Time. Apply a 2nd Coating for Added Shine and Protection!

8). Continue To Reapply as Needed. This Will Ensure Your Surface Stays Coated and Doesn't Need to be Washed and Waxed again!

After Care Instructions:

After care starts before the product is applied.

  • Mirror Shine™ should NOT wash off quickly after application. It should not wash off after a rainstorm or a car wash.
  • Decontaminating the car's surface prior to applying will help with the durability and length of Mirror Shine's seal.
  • If you find Mirror Shine is washing off too quickly, use a polish or decontaminant "decon" wash to remove the surface decontaminants before applying Mirror Shine.
  • This will ensure the product bonds to the car's clear coat and will increase sealant strength up to 80%.

Shop Mirror Shine Here